Loading ...
Loading ...
Loading ...
62 63
REATTACHING THE DOOR
1. Hold down the Latch Release button and extend the tab on the door.
2. Press the tab onto the small silver bar.
Removing the Door
Follow the tips below to get the best performance from your camera:
Your GoPro is waterproof to 10m – no housing needed. Ensure
thedoor is closed before using it in or around water, dirt or sand.
Before closing the door, ensure the seal is free of debris. Use a cloth
to clean the seal if needed.
Make sure your GoPro is dry and clean before opening the door.
Rinseyour camera with fresh water and dry it with a cloth if needed.
If sand or debris hardens around the door, soak your camera inwarm
tap water for 15 minutes and then rinse thoroughly to remove
thedebris before opening the doors.
If your camera gets wet, dry the touch screen with a soft cloth so
thatit registers your touch.
For the best audio performance, shake your camera or blow on the
mic to remove water and debris from the microphone holes. Do not
use compressed air to blow into the mic holes. This could damage
theinternal waterproof membranes.
After every use in salt water, rinse your camera with fresh water
anddry it with a soft cloth.
The lens cover is made from extremely tough strengthened glass,
butitcan still be scratched or cracked. Keep it clean with a soft,
lint-freecloth.
PRO TIP: Contact GoPro Support with any maintenance questions.
Formore information, check out gopro.com/support.
Maintenance
Loading ...
Loading ...
Loading ...