Loading ...
Loading ...
Loading ...
22
NS-TWM16WH9
www.insigniaproducts.com
3 Place the unconnected ends of the hoses into a bucket and turn on the faucets
connected to the water supply hoses for 10 or 15 seconds to remove any
foreign substances. Turn off the faucets.
4 Connect the ends of the water supply hoses to the water supply intake
connections at the top of the washer. Make sure that the rubber washers are in
place. The water supply hose connected to the hot faucet must be connected
to the hot water supply intake and the water hose connected to the cold
faucet must be connected to the cold water supply intake.
Note: If you do not want to use the hot water supply hose, insert a water intake cap
into the hot water supply intake hole. In this case, you must select the Tap Cold
option for the water temperature.
Loading ...
Loading ...
Loading ...