Loading ...
Loading ...
Loading ...
18
NS-TWM16WH9
www.insigniaproducts.com
You must ground your washer. In the event of a malfunction or
breakdown, grounding reduces the risk of electric shock by providing a
path of least resistance for the electric current.
Your washer is equipped with a power cord with a three-pronged
grounding plug for use in a correctly installed and grounded outlet.
The outlet must be correctly installed and grounded in accordance with
all local codes and ordinances.
Water requirements
To fill your washer in the correct amount of time, the water pressure needs
to be between 14 and 70 psi (100 to 600 kPa).
If the water pressure is less than 14 psi (100 kPa):
• The water valve may fail or may not shut off completely.
• The time it takes to fill your washer may be longer than the time your washer
controls allow. Your washer will turn off and report an error. A time-limit is
built into the controls to prevent flooding in your home if a hose becomes
loose.
• The water faucet must be within 4 ft. (122 cm) of the back of your washer to
allow for the provided water hoses to reach your washer.
To avoid the possibility of water damage:
• Make sure that the water faucets are easily accessible.
• Turn off the faucets when you are not using your washer.
• Periodically check to make sure that water is not leaking from the water hose
fittings.
Drainage requirements
• The recommended height for the drain standpipe is 35 in. (90 cm).
• The drain hose must be routed through the drain hose clip to the standpipe.
• The standpipe must be large enough to accept the outside diameter of the
drain hose.
Warning:
• You are responsible for providing adequate electrical services for your washer.
• An incorrectly connected equipment-grounding conductor can increase the risk
of electrical shock. Check with a qualified electrician or serviceman if you are not
sure whether your washer is grounded correctly.
• Do not modify the power cord plug that came with your washer. If the plug does
not fit the outlet, have the correct type outlet installed by a qualified electrician.
• To prevent unnecessary risk of fire, electrical shock, or personal injury, all wiring
and grounding must be done in accordance with the National Electrical Code
ANSI/FNPA, No.70 Latest Revision and local codes and ordinances.
• Never connect the ground wire to plastic plumbing lines, gas lines, or hot water
pipes.
Note: The drain hose is attached to the washer at the factory.
Loading ...
Loading ...
Loading ...