Loading ...
Loading ...
Loading ...
SONOS USER GUIDE
Connect the cables
Attach desired speakers
Your speaker’s power rating should be at least 55W for 8 ohm speakers, and at least 100W for 4 ohm
speakers. Don’t connect speakers rated at less than 4 ohms.
1. Use your thumb or finger to firmly push the spring-loaded speaker connector post inward to reveal the
connection hole.
2. Insert the stripped end of the speaker wire into the hole, and then release. The stripped portion should be
caught firmly in the connector post.
Note: Connect the red (+) and black (-) terminals from each speaker to the corresponding terminals on
the Connect:Amp. Mismatching of polarities will result in weak central sound, and a distorted
sense of sound direction.
3. Repeat to install the other speaker wires.
If your speakers have banana connectors, you can insert the plugs directly into the banana jacks on the back
of the Connect:Amp instead.
Connect the power cord
Attach the power cord and plug in the Connect:Amp.
If you don’t have the app, download it from the app store. You’ll use it to set up and control your Sonos
system. See Getting started
.
Line-in
Connect an external source like a phono preamp (your turntable may have a built-in phone preamp), or other
audio device. Learn more.
Loading ...
Loading ...
Loading ...