Loading ...
Loading ...
Loading ...
SONOS USER GUIDE
Connector panel
Ethernet ports (2) You can use an Ethernet cable (supplied) to connect to a
router, computer, or additional network device like a
network-attached storage (NAS) device.
LED indicators:
• Green (link connection)
• Flashing Yellow (network activity)
Right speaker terminals Use high-quality speaker wire to connect the right
speaker to Connect:Amp.
Left speaker terminals Use high-quality speaker wire to connect the left
speaker to Connect:Amp.
Voltage select 100 – 120V~ / 220 – 240V~ 50 – 60 Hz
Select the appropriate voltage setting for your country.
AC power (mains) input Use only the supplied power cord to connect to a power
outlet (using a third party power cord will void your
warranty).
Analog audio in You may use a standard RCA audio cable to connect the
Connect:Amp’s analog audio inputs to the audio outputs
from a separate audio component, like a turntable.
Subwoofer output
Note: If you disconnect your subwoofer, make
sure to also disconnect the subwoofer’s
cable from the Connect:Amp output.
You may connect a powered subwoofer to this output
using a standard RCA cable. The system will detect
when a cable is connected to the subwoofer output and
adjust the crossover frequency automatically.
Ethernet ports
Voltage select
AC power (mains)
input
Left speaker terminals
Right speaker terminals
Analog audio in
Subwoofer output
Loading ...
Loading ...
Loading ...