Loading ...
Loading ...
Loading ...
INSTALLATION & OPERATION
A.
INSTALLATION
1. Take the beer cooler out from its package. Place the beer cooler on a sturdy
horizontal (flat) surface. Make sure the beer cooler is at least 5-inches/10 cm away
from other appliances and walls on each side to allow proper ventilation.
Figure 6 Figure 7
2. Install the tap handle to the faucet by turning clockwise, make sure both end fit
together perfectly. (Show as Figure 6)
3. Set the water drip tray into the notch provided.(Show as figure 7)
4. Plug-in the beer cooler.
Note: Do not connect or disconnect the electric plug when your hands are wet. Before
using it, make sure the voltage conforms to the plug mark. Check whether the power
cord is well connected or not; if not, please don’t use it, and call the service center;
5. Put 800ml (27-oz) of water into the cooling cavity. Do not pour the water past the
max mark. (Show as figure 8) Unit can work without water, but cooling performance is
best when used with water.
Note: Make sure the drain switch is at “Off” position, and no extra objects in the cooling
cavity.
Figure 8 Figure 9
T
he max water level
line
Handle
Faucet
Drip tray
Make sure the drain
switch is at “OFF
”
position.
Loading ...
Loading ...
Loading ...