Loading ...
Loading ...
Loading ...
Figure 1
(Important: Before replacing the sealants or piercing the cooler kit, you must always
follow the instructions marked on the keg to eliminate the excess gas and ensure that
the keg has rested long enough to avoid foam coming out through the cooler piercing
pin /tap faucet. There is no need to release the gas and replace the seal rubber if you
use Heineken keg, because Heineken keg has its own CO2 pressure inside. You do
not need to connect the CO2 pressure system with the Heineken keg.
Figure 2
Figure 3
Loading ...
Loading ...
Loading ...