Loading ...
Loading ...
Loading ...
Figure 26 Figure 27
Ｅ
ＥＥ
Ｅ.
TO CHANGE THE CO2 CARTRIDGE
(Not needed for Heineken keg)
Please change the CO2 cartridge when beer cannot be dispensed - the CO2 pressure
knob is at “on” position and there is beer in keg.
1. Turn the CO2 pressure knob to “-“ position to close the CO2 supply.
2. Open the top cover, loosen the cartridge sheath by rotating left (counter-clockwise),
and take out the empty CO2 cartridge.
Insert a new 16g CO2 cartridge in the sheath, and screw the sheath tightly until you
hear a “pops”, which indicates that the cartridge seal has been pierced and the CO2
gas can flow into the keg. Make sure the bottle sheath is fixed tightly to prevent the
CO2 from leaking. Then put CO2 bottle sheath into the top cover.
3. Close the top cover of beer cooler;
3. Turn the CO2 pressure knob to “+“ position to turn on the CO2 supply, cooler is now
ready to dispense beer.
Reminder:
each 16g CO2 cartridge can pressure more than 5 liter of beer.
Whe
n you take out the beer connector and CO2
connector, please press the white button down
You must take out
the right fastener at
first, then push the
left fastener out as
arrow indication,
you can pull out
the dispensing unit
finally.
When you take out the fastener of beer
dispensing unit, you can move this unit
towards arrow indication
Loading ...
Loading ...
Loading ...