Loading ...
Loading ...
Loading ...
Figure 31 Figure 32
Warning: Remember press the seal circle with empty cartridge instead of new
cartridge, or will cause hazard.
B
、
、、
、
TO CHANGE BEER TUBE(show as figure 33)
Please replace the beer tube if beer tube is damaged and leaking.
1
．
Loosen the tube from connection: 1, Pull out the lock setting. Once off, draw the
tube out. (you may need to wiggle the lock setting while pulling)
2． Unscrew the nut at connection 2, and draw the tube out.
3. Replace a new beer tube, and install the beer tube according with reverse
procedure.
NOTES: Don’t move other screws when processing tube replacement, otherwise, it
may cause the beer leakage or gas leakage
Figure 33
C
、
、、
、
Replace the seal circle of beer tube(Show as figure 34)
Replace the seal circle of beer tube if the connector has a leak
1. Unscrew the beer tube as indicated in the below figure
2. Take out the seal circle of beer tube
3. Replace a new seal circle in the same position
4. Turn the seal circle tightly to avoid any leakage
Slim metal stick
1. Lock setting
2. Connector nut
Seal circle
Empty CO2
cartridge
Seal circle
Cartridge
connector
Loading ...
Loading ...