Loading ...
Loading ...
Loading ...
Assembling the StretchTrainer 15
3. To attach the knee pad, slide a washer onto each of the
four bolts removed in step 1. Place a bolt and washer on
the end of the 6mm hex wrench and insert it through the
crossbar.
4. To keep the knee pad properly aligned, thread all four
bolts, then alternately tighten each bolt securely.
Note: If you lose a bolt in the crossbar, tip the seat frame
on its side and shake it until the bolt drops out of the hole.
Figure 8: Knee pad attachment
To attach the axle:
1. Position the seat frame between the seat bracket and
align the axle mounting hole. Slide the axle half way
through the bracket and seat frame.
Figure 9: Axle placement
Loading ...
Loading ...
Loading ...