Loading ...
Loading ...
Loading ...
14 Assembling and Maintaining the StretchTrainer
3. Position the seat bumper against the back of the seat
plate so that the holes align with the holes in the seat
plate and padded seat. Secure it using two bolts and two
washers removed in step 1. To keep the padded seat
aligned properly, alternately finger tighten each bolt.
Note: There will be a small space (about ยน๎โ inch) between
the bumper and the padded seat.
4. After the padded seat is secured and properly aligned,
tighten each bolt using a 6mm hex wrench.
Important: Do not overtighten the bolts.
To attach the knee pad:
1. Remove the four bolts and four flat washers from the
underside of the knee pad.
2. Align the holes on the bottom of the knee pad with the
mounting holes in the crossbar.
Figure 7: Knee pad attachment to crossbar
Loading ...
Loading ...
Loading ...