Loading ...
Loading ...
Loading ...
12 Assembling and Maintaining the StretchTrainer
3. Attach the seat bracket on the underside of the rails using
the hardware removed from the base rails. Secure the
seat bracket using the two bolts and two flat washers
removed in step 1. Finger tighten the bolts.
Figure 4: Position of bolts on underside of base rails
4. Position the handlebar over the upright supports and slide
it into place.
Note: The wrist straps on the handlebars should face
toward the rear of the equipment (see figure 2).
5. Align the holes in the front and back of the handlebar with
the holes in the upright supports. Secure them using four
1ยน๎โ-inch bolts, four lock washers, and four flat washers
from the hardware kit.
Note: Do not fully tighten the bolts at this time. This will
make it easier to install the seat frame.
Figure 5: Bolt locations on upright supports
Loading ...
Loading ...
Loading ...