Loading ...
Loading ...
Loading ...
18
www.udirc.com
Propeller Installation Diagram
2. Then the another end of this Micro cable connect to drone bottom housing
(Picture 23).
1. Use the screwdriver to remove the screw in counterclockwise direction, pull up
the damaged propeller and take it out (picture 24).
Motor Installation Diagram
1. Rotate the screw driver in counter clockwise to loose the screw, and take out
3pcs of screws in the lampshade, disconnect the wire and then take out the
defective motor(Picture 26).
2. Replace with the same new motor, connect the motor wire(Picture 27), put on
the lampshade, then tighten 3pcs of screw in clockwise(Picture 28).
2. Replace with the same new rotating direction propeller, aim at the screw hole to
install it(Picture 25), then tighten the screw in clockwise.
Picture 23
Picture 24
Picture 26 Picture 27 Picture 28
Picture 25
Loading ...
Loading ...
Loading ...