16631760 User Manual

Loading ...

NA_EN

■ The Bluetooth transmitter operates in the 2�4 GHz band� The

standard output is 3�16 mW�

■ This device operates on the same frequency as commercial,

educational, and medical devices and wireless transmitters�

It also operates on the same frequency as licensed transmitters

and special unlicensed low-voltage transmitters used in radio-

frequency identification tracking systems for assembly lines and

in other similar applications.

■ To prevent interference with the above devices, observe the

following precautions�

Confirm that the radio-frequency identification transmitter is

not in operation before using this device. If you notice that this

device causes interference in low-voltage radio-frequency

identification tracing systems, refrain from further use of this

device and contact a FUJIFILM representative.

■ The following may be punishable by law:

– Disassembly or modification of this device.

– Removal of device certification labels.

■ Trademark Information

The Bluetooth® word mark and logos are registered trademarks

owned by the Bluetooth SIG, Inc., and any use of such marks by

FUJIFILM is under license.

For customers in the USA:

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

For more information, access the website below.

http://www.fujifilm.com/products/instant_photo/cameras/instax_

mini_liplay/

CAUTION

This device has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This device

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular

installation. If this device does cause harmful interference to radio

or television, which can be determined by turning the device off

and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the device and receiver.

• Connect the device into an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

Changes or modifications of this device will void the Limited

Product Warranty and may void any authority to further use this

device.

This transmitter must not be co-located or operated in conjunction

with any other antenna or transmitter.

The available scientific evidence does not show that any health

problems are associated with using low power wireless devices.

There is no proof, however, that these low power wireless devices

are absolutely safe. Low power Wireless devices emit low levels of

radio frequency energy (RF) in the microwave range while being

used. Whereas high levels of RF can produce health effects (by

heating tissue), exposure of low-level RF that does not produce

heating effects causes no known adverse health effects. Many

studies of low-level RF exposures have not found any biological

effects. Some studies have suggested that some biological effects

might occur, but such findings have not been confirmed by

additional research. The “INSTAX mini HM1” has been tested and

found to comply with FCC radiation exposure limits set forth for an

uncontrolled environment and meets the FCC radio frequency (RF)

Exposure Guidelines.

Notes on the Grant

To comply with Part 15 of the FCC Rules, this product must be used

with a FUJIFILM-specified ferrite-core USB cable (provided along

with the camera).

For customers in Canada :

CAN ICES-3 (B)/NMB-3 (B)

This device contains licence-exempt transmitter(s)/receiver(s) that

comply with Innovation, Science and Economic Development

Canada’s licence-exempt RSS(s). Operation is subject to the

following two conditions:

This device may not cause interference.

This device must accept any interference, including

interference that may cause undesired operation of the device.