Loading ...
Loading ...
Loading ...
Page 17 of 23
USING THE COMFORT KIT (AVAILABLE SEPERATELY)
The optional Comfort Kit allows the air conditioner to be used in
spaces where there is not enough space to fit a standard
portable air conditioner. It allows the Airflex 15 to be placed
outside the room to cool. The air conditioner can then cool or
heat the space via the Comfort Kit which acts also as a wired
remote and a remote extender for the original remote. By
moving the unit outside the room the noise of the portable unit is
significantly decreased.
The Comfort Kit is available from your original retailer and
manufacturer under stock code: AIRFLEX15V2-Comfortkit
CONNECTING THE COMFORT KIT
1. Remove the blanking plate from the side of the air
conditioner by removing the two screws holding it in place.
2. Attach the comfort kit in position in the room, ensuring there
is space behind, to allow both the vent pipe and
communication wire to be routed to the Airflex 15.
3. Attach the wire from Comfort Kit to
the side of the air conditioner. This
both provides power to the Comfort
Kit, and communicates when the
remote or buttons on the Comfort Kit
are used.
4. Attach one end of the exhaust hose onto the
back of the comfort kit by twisting it into
position. The opposite end of the hose
should then be attached to the Hot air outlet
on the air conditioner for heating, or the Cold
air outlet for cooling.
Your Comfort Kit is now ready to use. Both the
remote supplied with the air conditioner, and the
buttons on the Comfort Kit can be used to control
the operation of the air conditioner.
Note: We would advise for the unit to be situated
indoors when using the heating function, to
ensure efficient performance of the unit.
Loading ...
Loading ...
Loading ...