Loading ...
Loading ...
Loading ...
Page 14 of 23
The hose can be vented via a tilted window, a door or wall aperture. Make sure that no warm
air from outside can enter the room.
Set the function to “COOLING”. Set the target temperature using the temperature control.
The target temperature range is selectable between 17°C and 30°C. The unit must only be
used in an ambient temperature of up to 32°C.
Note: After switching on, the compressor will only start after a 3 minute delay. For full
cooling effect please allow a further 10 minutes of operation.
COOLING WHEN THE AIR CONDITIONER IS PLACED OUTDOORS
(DUCTING THE COLD AIR INTO THE ROOM)
Connect the hose to the cold air outlet of the air conditioner, after exchanging the grills if
necessary. The air hose will send cold air into the room, while the front grills will expel hot
air.
Place the unit in the shade if possible and in a cool, protected place in order to increase
efficiency and to avoid overheating. At an ambient temperature of over 32°C, the unit will
stop cooling to protect the compressor. If this become recurrent we recommend you use the
INDOOR COOLING OPERATION. To prevent interruptions in the units operation a drainage
hose for condensation water should be connected.
Set the function to “COOLING”. The temperature range is selectable between 17°C and
30°C. Fresh cooled air is led into the room via the air hose. The hose can be vented via a
tilted window, a door or wall aperture. Make sure that no warm air from outside can enter the
room.
Using the optional Airflex Comfort Kit will enable wired or wireless control of the air
conditioner from inside the room to be cooled.
Note: After switching on, the compressor will only start after a 3 minute delay. For full
cooling effect please allow a further 10 minutes of operation.
Loading ...
Loading ...
Loading ...