Loading ...
Loading ...
Loading ...
en Wireless temperature sensor
36
‚Wireless temperature
sensor
Wi r el ess temper at ur e s ensor
You will need to connect the wireless temperature
sensor to the control panel before using the cooking
functions for the first time.
Preparing and maintaining the wireless
temperature sensor
This section provides information on:
■ Adhering the silicone patch
■ Attaching the wireless cooking sensor
■ Cleaning
■ Changing the battery
The silicone patch and the cooking sensor can be
purchased at a later time from specialist retailers, our
technical after-sales service or our official website. To
do this, quote the relevant reference number:
Adhering the silicone patch
The silicone patch attaches the temperature sensor to
the cookware.
When a pan is used for the first time with the cooking
functions, the silicone patch must be adhered directly to
the pan. It is important
1. That the adhesive area on the pan is free from
grease. Clean the pan, dry it thoroughly and wipe the
adhesive area with a spirit.
2. Remove the protective film from the silicone patch.
Adhere the silicone patch to the outside of the pan in
the correct place using the enclosed template as a
guide.
3. Press down all over the surface of the silicone patch,
including in the centre.
The adhesive requires one hour to fully harden. Do not
use or clean the pan during this time.
Notes
■ Do not leave the pan with the silicone patch to soak
soapy water for long periods of time.
■ If the silicone patch comes off, attach a new one.
Fitting the wireless temperature sensor
Attach the temperature sensor to the silicone patch and
align it correctly.
Notes
■ Make sure that the silicone patch is completely dry
before attaching the temperature sensor.
■ Position the cookware in such a way that the
temperature sensor is pointing towards the outer
side of the hob.
■ To prevent overheating, the temperature sensor
must not be pointed towards another item of
cookware that is hot.
■ Remove the temperature sensor from the saucepan
after cooking. Store it in a clean, safe place away
from sources of heat.
■ You can use up to three temperature sensors at the
same time.
Connecting the wireless temperature sensor
to the control panel
To connect the wireless temperature sensor to the
control panel, follow the instructions below:
1. Select the ™‚… menu; see the section on ~ "Basic
settings"
The hotplate indicator will light up.
2. Select the hotplate and its indicator will light up. A
signal will sound. The å indicator will light up.
3. Press the å symbol on the wireless temperature
sensor within 30 seconds.
After a few seconds, the status of the connection
between the temperature sensor and the control
panel will appear on the hotplate's display.
00577921 Set of 5 silicone patches
HEZ39050 Cooking sensor and set of 5 silicone patches
Status
‹
Connected correctly
‚
Not connected correctly: Transmission error.
ƒ
Not connected correctly: Temperature sensor fault.
Loading ...
Loading ...
Loading ...