Loading ...
Loading ...
Loading ...
49
Attaching and Detaching a Lens
Turn the zoom ring on the lens
with your fingers.
Perform the zoom operation before
focusing. Turning the zoom ring after
achieving focus may throw off the focus.
While pressing the lens release
button, turn the lens as shown by
the arrow.
Turn the lens until it stops, then detach it.
Attach the rear lens cap to the
detached lens.
Zooming
Detaching the Lens
Do not look at the sun directly through any lens. Doing so may cause loss of vision.
When attaching or detaching a lens, set the camera’s power switch
to <2>.
If the front part (focusing ring) of the lens rotates during autofocusing, do
not touch the rotating part.
During viewfinder shooting or Live View shooting, if you use a TS-E lens
(except the TS-E17mm f/4L or TS-E24mm f/3.5L II) and shift or tilt the
lens or use an extension tube, the standard exposure may not be
obtained or the exposure may be irregular.
If you use a TS-E lens, certain shift and rotation functions may be
restricted, and attaching or detaching the lens may also be restricted.
Angle of View
Since the image area is smaller than
the 35mm film format, the effective
angle of view of an attached lens will be
equivalent to that of a lens with approx.
1.6x of the focal length indicated.
Image area (Approx.)
(22.3 x 14.9 mm /
0.88 x 0.59 in.)
35mm film format
(36 x 24 mm /
1.42 x 0.94 in.)
For instructions on how to use the lens, refer to the Lens Instruction Manual (p.4).
Loading ...
Loading ...
Loading ...