Loading ...
Loading ...
Loading ...
37
GEAppliances.ca
Problem Possible Causes What To Do
Food does not
broil properly
Improper rack position • See the Broiling guide.
being used.
Food being cooked in a hot pan. • Use the broiling pan and grid that came with your range.
Make sure it is cool.
Aluminum foil used on the • See the Using the oven section.
broiling pan and grid has
notbeenfittedproperly
and slit as recommended.
In some areas the power • Preheat the broil element for 10 minutes.
(voltage) may be low.
• Broil for the longest period of time recommended
in the Broiling guide.
Control signals after You forgot to enter a bake • Press the BAKE pad and desired temperature or the CLEAN
entering cooking time temperature or cleaning time. pad and desired clean time.
or delay start
Display flashes "bAd" The installed connection • Contact installer or electrician to correct miswire.
then "linE" with a from the house to the unit
loud tone is miswired.
Safety Instructions Operating Instructions Care and Cleaning
Troubleshooting Tips
Consumer Support
Surface units do
not work
There has been a main power
supply surge and/or a power
interruption and surge
• On the Control Panel, activate the Self Clean mode
(press the SELF CLEAN button)
• Wait for 30 seconds and then press the OFF button.
• The cooktop should now be ready to operate
The words “CLOSE
DOOR” flashes or
scrolls in the display
This is a normal condition.
The “CLOSE DOOR” is a reminder
message to keep the oven door
closed during broil mode
• This is normal. Keep oven door closed during broil mode
Loading ...
Loading ...
Loading ...