Loading ...
Loading ...
Loading ...
Basic Operation & Riding
51
Starting & Stopping the Engine
If the engine fails to start after repeated attempts, it may be flooded
with excess fuel. To clear a flooded engine:
1.
Move the engine stop switch to OFF (r).
2.
Move the choke lever to the fully OFF position.
3.
Open the throttle fully.
4.
Press the start button for 5 seconds.
5.
Wait 10 seconds, then turn the engine stop switch to RUN (e).
6.
Repeat the “Normal Air Temperature” starting procedure, but
don’t use the choke.
If the engine still won’t start, refer to If Your Engine Quits or Won’t
Start, page172.
Normal Engine Stop
To stop the engine, make sure the transmission is in neutral by
checking that the neutral indicator light is on, then turn the ignition
switch OFF (w).
The engine stop switch should normally remain in the RUN (e)
position even when the engine is OFF.
If your ATV is stopped with the engine stop switch OFF (r) and the
ignition switch ON (q), the battery will discharge.
Emergency Engine Stop
To stop the engine in an emergency, use the engine stop switch. To
operate, slide the switch to the OFF (r) position.
Flooded Engine
How to Stop the Engine
Loading ...
Loading ...
Loading ...