Loading ...
Loading ...
Loading ...
Servicing Your Honda
99
Engine Oil & Filter
(cont’d)
Install a New Engine Oil Filter:
1.
Remove the oil filter cover (1) by removing the bolts (2). Let the
remaining oil drain out. Discard the oil filter (3) in an approved
manner (page 168).
2.
Apply engine oil to a new O-ring (4) and install it to the oil filter
cover. Then install a new oil filter. Use only the Honda Genuine
oil filter or a filter of equivalent quality specified for your model.
Using the wrong Honda filter or a non-Honda filter which is not
of equivalent quality may cause engine damage.
3.
Reposition the spring (5) to the engine crankcase and install a
new oil filter with the rubber seal (6) facing out, away from the
engine. You will see the “OUTSIDE (TOWARDS FILTER COVER)”
mark (7) on the filter body, near the seal.
NOTICE
Improper installation of the oil filter can cause serious engine damage.
(5)
(4)
(1) oil filter cover
(2) bolts
(3) oil filter
(4) O-ring
(2)(3) (6)
(7)
(5) spring
(6) rubber seal
(7) OUTSIDE mark
(1)
RIGHT SIDE
Loading ...
Loading ...
Loading ...