Loading ...
Loading ...
Loading ...
1. This appliance was designed for ease of installation and operation. However, we recommend that you read all
sections of this manual before you begin installation.
2. Do not remove permanently affixed labels, warnings or data plates from your appliance. This may void the
manufacturer’s warranty and/or hinder effective servicing and maintenance. These instructions are to remain with
the appliance and the consumer is to retain them for future reference.
3. Please observe all local and national build codes and ordinances. If no local codes are applicable, please follow all
wiring requirements in accordance with the National Electrical Code.
4. Please check your local codes for any make-up air requirements.
5. This hood is for residential use only and is not designed for installation over a commercial product.
To reduce the risk of fire, electric shock or injury observe the following:
• Use this unit in the manner intended by the manufacturer.
• Before cleaning or servicing unit, turn power off to the unit at the service panel.
• Installation work and electrical work must be performed by qualified individuals in accordance with all applicable
codes and standards, including fire-rated construction.
• Do not damage any existing electrical or hidden utilities when drilling, cutting and/or removing a wall, ceiling or floor.
• Sufficient air is required to properly exhaust gases through the flue of natural and liquid propane fueled cooking
equipment to avoid any backdrafts.
• Use only metal ductwork. Do not use flexible or corrugated duct.
• Never vent ducted exhaust air into another room or garage. Ducted exhaust air must vent outdoors.
INSTALLATION INSTRUCTIONS
4
IMPORTANT
WARNING
!
Loading ...
Loading ...
Loading ...