Loading ...
Loading ...
Loading ...
Taking Care of the Unexpected
257
If the Battery Is Low
1.
To prevent an accidental short circuit, turn the ignition switch
OFF (w).
2.
Remove the front hood (page 137).
3.
Using a fully charged 12-volt battery, connect the positive (+) side
of the jumper cable to the charged battery, and connect the
positive (+) side on the other end of the jumper cable to the
positive (+) terminal of vehicle battery.
4.
Connect the negative (-) side of the jumper cable to the charged
battery, and connect the negative (-) side on the other end of the
jumper cable to the front final gear case bracket.
5.
After starting the engine, remove the negative (-) sides of the
jumper cable from the vehicle and the battery. Then remove the
positive (+) sides of the jumper cable from the vehicle battery and
the charged battery.
6.
Close the rubber dust cover and install the front seat.
• Do not let the positive (+) side of the jumper cable touch on the
negative (-) terminal.
• If the jumper cable is connected to the battery with the polarity
reversed, the battery can explode or the electrical system will
be seriously damaged.
UNDER FRONT HOOD
LEFT SIDE
charged battery
front final gear case bracket
jumper cable
vehicle battery
18 SXS1000M-31HL46200.book 257 ページ ２０１７年５月２９日 月曜日 午前９時５０分
Loading ...
Loading ...
Loading ...