Loading ...
Loading ...
Loading ...
Servicing Your Honda
158
Engine Oil & Filters
Install a New DCT Oil Filter:
Place shop towels under the oil filter cover because oil will flow out.
12.
Remove the DCT oil filter cover (DCT marked) and O-ring by
removing the bolts. Let the remaining oil drain out. Discard the oil
filter in an approved manner (page 231).
13.
Apply engine oil to a new O-ring and install it to the DCT oil filter
cover. Install a new oil filter.
Use only the Honda Genuine oil filter or a filter of equivalent
quality specified for your model. Using the wrong Honda filter,
inserting a filter in backwards, using a filter with no OUTSIDE
markings, or a non-Honda filter which is not of equivalent quality
may cause engine damage.
14.
Install a new filter with the OUTSIDE mark facing outward,
reinstall the spring and DCT oil filter cover making sure the bolts
are tightened to the specified torques:
9 lb·ft (12 N·m, 1.2 kg·m)
NOTICE
Improper installation of the oil filter can cause serious engine
damage.
DCT oil filter cover
OUTSIDE mark
spring
bolt
o-ring
oil filter
LEFT SIDE
18 SXS1000M-31HL46200.book 158 ページ ２０１７年５月２９日 月曜日 午前９時５０分
Loading ...
Loading ...
Loading ...