Loading ...
Loading ...
Loading ...
Servicing Your Honda
167
Rear Final Gear Oil
Refer to Safety Precautions on page 123.
Check the rear final gear oil level every 1,800 miles (3,000 km) or
300 hours of operating your Honda SXS, and add if needed.
1.
Park your Honda SXS on a firm, level surface.
2.
Remove the oil fill cap.
3.
Make sure the oil level is at the lower edge of the oil fill inspection
hole.
4.
Apply a thin coat of grease to a new O-ring, and insert it into the
oil fill cap groove.
5.
Install and tighten oil fill cap to the specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
Oil Recommendation
API classification
GL-4 or GL-5 except oils labeled as
energy conserving on the circular
API service label
type hypoid gear oil
viscosity (weight) SAE 80W-90
suggested oil Honda shaft drive oil or equivalent
Checking Oil
RIGHT REAR
lower edge of oil
fill inspection hole
oil fill cap
oil fill cap O-ring
18 SXS1000M-31HL46200.book 167 ページ ２０１７年５月２９日 月曜日 午前９時５０分
Loading ...
Loading ...
Loading ...