Loading ...
Loading ...
Loading ...
60
F
Unclip the hall sensor
from the housing.
Move the sensor housing
to align the opposite hall
sensor clip with the centre
of the cabinet.
Unhook the interceptor
board harness from
sensor housing so
harness is loose.
Reinstall the sensor housing
using #8x16 screws (2x)
into the pre-drilled holes in
the cabinet top panel.
Clip the hall sensor into
the sensor housing in
the pocket closest to the
centreline of the cabinet.
Press the harness from
the interceptor board into
the forks on the sensor
housing.
Remove the #8x16 screws
(2x) from the sensor
housing.
CHANGE THE DOOR HINGES (OPTIONAL)
Moving the sensor housing
1 54
2 6
3 7
Loading ...
Loading ...
Loading ...