Loading ...
Loading ...
Loading ...
9998
DATA-TRANSFER MODE
CONNECTING TO MAC OS 8.6
To download and install this software, follow the instruction on the Apple web site.
Always read the attached terms and conditions before installing any new software.
The add new hardware wizard will confirm
the location of the driver. Click “Next” to
install the driver in the system.
• One of three drivers may be located:
MNLVENUM.inf, USBPDR.inf, or
USBSTRG.inf.
• The letter designating the CD-ROM drive will
vary between computers.
The last window will confirm the driver has
been installed. Click “Finish” to close the
add new hardware wizard.
When the my-computer window is
opened, a new removable-disk icon will
be displayed. Double click on the icon to
access the camera’s CompactFlash card;
see page 100.
To access this camera with a computer with Mac OS 8.6, the USB storage support
1.3.5.smi must be installed first. This software is supplied by Apple Computer, Inc. free
of charge. It can be downloaded from the Apple Software Updates web site at
http://www.apple.com/support.
AUTO POWER SAVE (DATA-TRANSFER MODE)
If the camera does not receive a read or write command within ten minutes, it will shut
down to save power. When the camera shuts down, an unsafe-removal-of-device warn-
ing may appear on the computer monitor. Click “OK.” Neither the camera or computer
will be damaged in this operation.
Turn off the camera with the mode dial. Remake the USB connection by turning the
mode dial back to the data-transfer position.
Loading ...
Loading ...
Loading ...