Loading ...
Loading ...
Loading ...
38
Symptoms Reason Solution
Frosts has formed
in the freezer
compartment.
Is the air entry or exit of the
freezer compartment blocked?
•
Make sure that air entry or exit is not
blocked so that the air can circulate
inside.
Is the freezer compartment
overlled?
•
Maintain an appropriate space
between items.
Frost or
condensation has
formed inside
or outside the
appliance.
Did you open and close the
appliance door frequently or is
the appliance door improperly
closed?
•
Frosts or condensation can form if
the outside air penetrates inside the
appliance.
Is the installation environment
humid?
•
Condensation can appear on the
exterior of the appliance if the
installation area is too humid or on a
humid day such as a rainy day. Wipe
off any moisture with a dry cloth.
The appliance
is noisy and
generates
abnormal sounds.
Is the appliance installed on
a weak oor or improperly
leveled?
•
Install the appliance on a solid and at
area.
Does the rear of the appliance
touch the wall?
•
Adjust the installation position to
allow enough clearance around the
appliance.
Are objects scattered behind
the appliance?
•
Remove the scattered objects from
behind the appliance.
Is there an object on top of the
appliance?
•
Remove the object on top of the
appliance.
The side or front
of the appliance is
warm.
There are anti condensation
pipes tted to these areas
of the appliance to reduce
condensation forming from
around the door area.
•
The heat releasing pipe to prevent
condensation is installed on the front
and side of the appliance. You may
feel it particularly hot right after the
appliance is installed or during the
summer. You can be assured that this
is not a problem and is quite normal.
There is water
inside or outside of
the appliance.
Is there water leakage around
the appliance?
•
Check if the water has leaked from a
sink or another place.
Is there water on the bottom
of the appliance?
•
Check if the water is from the thawed
frozen food or a broken or dropped
container.
Loading ...
Loading ...
Loading ...