Loading ...
Loading ...
Loading ...
Emergency engine stop
To stop the engine in an emergency, push and hold the
engine stop button.
(1) ENGINE STOP BUTTON (1) LOCK NUT
(2) ROD
(3) ADJUSTING BOLT
(4) FREE PLAY
Brake pedal height
The brake pedal height can be adjusted to the rider’s pre-
ference.
To adjust the rear brake pedal height:
1. Loosen the push rod lock nut and brake pedal adjusting
bolt lock nut. Then turn the both adjusting bolts in
direction “A” to raise the pedal, or in direction “B” to
lower it.
2. Tighten the lock nuts at the desired pedal height.
3. After adjustment, check the brake pedal free play at
the top of the pedal.
Make sure that the clearance between the front adjus-
ting bolt and frame is at least 1 mm (0.04 in).
(1) MODE SWITCH
(2) MODE 1
(3) MODE 2
Mode switch
The ECU for the Cota 4RT260 PGM-FI electronic injec-
tion system has two operational maps (Dry and Wet),
which can be selected depending on the conditions:
Switch in Mode 1:
Dry (appropriate for dry terrain)
Switch in Mode 2:
Wet (appropriate for wet terrain)
Operating instructions
1-7
1-7
1
1
3
2
A
A
B
B
1
1
2
3
4
Loading ...
Loading ...
Loading ...