Loading ...
Loading ...
Loading ...
Installation
Install the fork leg.
Raise the fork through the bottom bridge and top bridge.
Place the fork tubes in the top clamp level as shown in
the picture.
(1) FORK TUBE
(2) TOP BRIDGE
(1) FORK SPRING
(2) SPRING SEAT
(3) DISTANCE COLLAR
(4) O-RING
(5) FORK BOLT
(6) TAPERED BUSHING (ED/3ED)
(7) FORK TUBE
Install the fork spring, spring seat, distance collar and the
tapered bushing (ED/3ED).
Apply recommended fork fluid to the new O-ring, then
screw the fork bolt into the fork tube.
Torque:
ED/3ED: 13.0 N•m (1.3 kgf•m)
2ED/4ED: 20.0 N•m (2.0 kgf•m)
Pour half the required amount of recommended fork fluid
in the fork leg.
Specified fork fluid:
OJ Racing Special Fork Oil Type 01 (SAE 5W) or equivalent
Pump the fork tube slowly 8-10 times.
Pour additional fluid to the specified capacity.
Oil level
100 mm (3.9 in)
Oil capacity
410 cc
(13.9 US oz)
(14.4 Imp oz)
NOTICE
Totally extending fork may cause oil leakage.
5-11
5-11
Frame servicing
FORWARD
2
1
4
1
2
7
3
5
6
Loading ...
Loading ...
Loading ...