User Manual Shark HV322 Bordeaux Rocket DeluxePro Upright Corded Stick Vacuum Cleaner

• User Manual - (English, French, Spanish)

• Product Documentation - (English)

Table of contents

• Getting to know your Shark® Rocket® Ultra-Light Vacuum
• Assembly
• Storage
• Using the Motorized Floor Nozzle
• Using the Dust-Away™
• Above Floor Cleaning
• Accessories
• Maintenance
• Trouble-Shooting Guide
• Important Safeguards
• Technical Specification

User Manual Vacuum Cleaner

Getting to know your Shark® Rocket® Ultra-Light Vacuum

MAIN UNIT

1. Power/LO/HI Switch

2. LED Light

3. Wand Release

4. Cord Hooks (not visible)

5. On-Board Tool Clip

6. Hand Vac Storage Hook

7. Floor Nozzle Release Pedal

8. Headlights

9. Dust Cup Release

Assembly

STEP 1

1. Insert the wand into the floor nozzle connector until you hear a “click”.

STEP 2

2. Insert the handheld portion into the top of the wand until you hear a “click”.

STEP 3

3. This vacuum comes with a detachable clip to store up to 2 accessories on board. Snap clip on to the wand. Store one accessory on top holder and one accessory on bottom holder.

Storage

OPTION 1

Press the WAND RELEASE button on the top of the wand to release the handheld vacuum. There is a catch on the bottom of the handheld vacuum. Hang it from the hook located on the bottom portion of the wand. Wrap the cord around the two cord hooks.

OPTION 2

Use the wall mount that is included. Drill two 5/16” holes and insert plastic anchors provided into the wall. Using a Philips head screwdriver, screw the wall mount into the plastic anchors. There is a catch on the bottom of the handheld vacuum. Hook it onto wall mount.

Using the Motorized Floor Nozzle

This vacuum has a 2-speed POWER slider switch, optimized for bare floor, delicate area rug and carpet cleaning. The floor nozzle has headlights that illuminate the floor surface. The lights turn on in either speed setting.

STEP 1

1. Plug the unit in and pull it back.

STEP 2

2. Slide the POWER switch to the first position to clean bare floor surfaces and delicate area rugs. The brush roll will spin slowly to help with debris pick-up.

STEP 3

3. Slide the POWER switch to the second position to clean carpets. The brush roll will spin faster to help pick up debris below the surface.

Using the Dust-Away™

1. Slip two tabs between the nozzle and the duster base and attach them to the front fasteners. Then pull the other two tabs tightly around to the back fasteners. Ensure that the pad is flat against the bottom surface and tightly secured.

2. Slide the POWER switch to the first position and use the Dust-Away™ Hard Floor Attachment to clean hard floor surfaces. Do not use to clean damp floors or wet/sticky messes. Only use pads provided by Shark®, which are designed to work with the DustAway™ Hard Floor Attachment.

Microfiber pad care

Machine or hand wash the pads separately in warm water with liquid detergent. Do not use bleach or fabric softeners as they may damage or leave a coating that will reduce the cleaning performance of the pads. Tumble dry low or line dry to extend the life of the microfiber fabric. For best results, we recommend replacing your microfiber pads every 3 to 4 months

Above Floor Cleaning

This vacuum has the reach to clean above floors or in tight spaces by using the wand. It’s also a convenient handheld vacuum when using it without the wand.

STEP 1

1. Stand the vacuum upright. Step on the foot pedal and pull the wand up to disconnect from the floor nozzle. Attach desired cleaning accessory

STEP 2

2. Press the WAND RELEASE button on the top of the wand to disconnect it from the handheld portion. Attach desired cleaning accessory. The LED light in the handheld vacuum turns on automatically when the power is on.

TIP: You can attach the handheld vacuum directly to the floor nozzle for convenient cleaning on stairs.

Accessories

Select cleaning accessories are included.

LOOKING FOR MORE?

To enhance your cleaning experience, additional accessories are available for purchase at www.sharkrocket.com or by calling 1.800.798.7398. For a list of what is included with this model, refer to inside flap of box.

CREVICE TOOLS

a - 12” Crevice Tool : Clean in between tight spaces or reach baseboards and ceilings with this slim crevice tool. (163FLIHV3)

b - 18” Flexible Crevice Tool : Extend and flex to an 18” length to access corners, baseboards, tight spaces or ceilings. The rubberized tip prevents scratches on surfaces. (228FFJV300)

c - Duster Crevice : Two cleaning tools in one. The crevice tool gives you extended cleaning reach for small spaces, while the dusting brush cleans a multitude of surfaces. (164FLIHV3)

DUSTING BRUSHES

d - Upholstery Tool : Perfect for grabbing pet hair and lint from furniture and other upholstered surfaces. (166FLIHV3)

e - Wide Upholstery Tool : Perfect for grabbing pet hair and lint from furniture, mattresses and other upholstered surfaces. (165FLIHV3)

f - Dusting Brush : Great for dusting a multitude of surfaces such as shelves, tables, baseboards, window/door frames, and much more. Turn the brush head to adjust the angle to the surface you’re cleaning. (229FFJV300)

Multi-Angle Dusting Brush

5-position soft dusting brush for cleaning shelves (straight out/ downward orientation), blinds, walls, ceiling fans and lights (upward and downward orientation). Adjust the angle of this brush to the desired cleaning surface. (137FLIV300)

TruePet™ Motorized Brush

The power of a full size upright in the palm of your hand. Picks up pet hair, loose debris, and powerfully cleans dander out of upholstery and surfaces. (168FLV322B)

Pet Multi Tool

Two cleaning tools in one. The stiff bristle brush gets stuck-on debris off a multitude of surfaces. Remove the bristles to reveal an upholstery tool for removing stubborn pet hair from upholstery and more. (1126FT323)

Flexible Hose

Stretch and flex this extension hose to clean around objects and get into hard to reach spaces. Attach the crevice tool or another accessory depending on what you are cleaning. (290FFJ321)

Dust-Away™ Hard Floor Attachment with Washable Microfiber Pad

Direct suction for big crumbs and debris while microfiber pad dusts hard wood and tile floors. (XHFGV321, P200W)

Home and Car Detail Kit

Extension wands and micro tools to clean the tightest spaces. (XCDV300).

Appliance Wand

Clean under and behind hard to move appliances and furniture with this adjustable 36” tool. Flip the extension piece over to clean the underside of appliances. (138FLIV300)

Maintenance

To keep your vacuum’s suction power optimal, follow these instructions.

Make sure unit is off and cord unplugged.

EMPTY THE DUST CUP

1. Press the WAND RELEASE button on the top of the wand to disconnect it from the handheld portion.

OR

Remove the dust cup from the handheld vacuum by squeezing the two dust cup release buttons on both sides of the base at the same time and pulling it out.

2. Hold dust cup over a trash bin and press the empty button on the front of the dust cup. The bottom lid will open, allowing the debris to fall out.

3. Once dust cup is empty, close the bottom lid and insert dust cup back into handheld and you will hear it click into place.

CLEAN THE FILTERS

1. Access the Pre-Motor foam and felt filters by lifting the latch on the top of the handheld vacuum. Remove and hand wash them every month. Let air dry completely before replacing. Tap loose dirt off filters between washes as needed. Insert the felt filter first and then place the foam filter on top of it.

2. Access the Post-Motor filter under the handle. Remove and hand wash once a year. Let air dry completely before replacing

STEP 1

STEP 2

TO CHECK FOR BLOCKAGES, REMOVE AND INSPECT:

HANDHELD AND WAND

1. Remove the wand from the handheld portion and check all dust cup intake openings.

2. Remove the floor nozzle from the wand and check the wand for blockages.

BOTTOM OF FLOOR NOZZLE

1. Use a coin to unlock the three locks on the bottom of the floor nozzle.

2. A portion of the base is removable to allow for better access to the brushroll and exposure to the airway. Shine a flashlight from the bottom to check for possible blockage in the airway

3. Remove any string, carpet fibers or hair that may be wrapped around the brushroll. There is a groove along the brush bar that allows a pair of scissors to cut across it to loosen up the debris.

4. To re-assemble, replace base by lining it up along the front of the nozzle. Push down to snap into place until you hear a click. Lock the three locks.

Trouble-Shooting Guide

Important Safeguards

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY

1. DO NOT use outdoors or on wet surfaces.

2. Unplug from electrical outlet when not in use and before servicing.

3. DO NOT use vacuum cleaner with a damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to EURO-PRO Operating LLC for examination, repair, or adjustment.

4. DO NOT pull or carry vacuum cleaner by the cord or use the cord as a handle.

5. DO NOT unplug by pulling on cord; to unplug, grasp the plug, not the cord.

6. DO NOT handle plug or vacuum cleaner with wet hands.

7. DO NOT run the vacuum cleaner over the power cord, close a door on the cord or pull cord around sharp corners.

8. The use of an extension cord is not recommended.

9. DO NOT leave vacuum cleaner when plugged in.

10. Keep cord away from heated surfaces.

11. Turn off all controls before plugging or unplugging the vacuum cleaner.

12. Always turn off the vacuum cleaner before connecting or disconnecting motorized nozzle.

13. Store vacuum cleaner with the power cord secured around the two cord holders - as shown in the STORAGE section.

14. This vacuum does NOT stand upright on its own.

GENERAL USE

15. Use only as described in this manual.

16. DO NOT put any objects into openings. DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.

17. Keep your work area well lit.

18. Keep the vacuum cleaner moving over the carpet surface at all times to avoid damaging the carpet fibers.

19. DO NOT place vacuum cleaner on unstable surfaces such as chairs or tables.

20. DO NOT allow young children to operate the vacuum cleaner or use as a toy. Close attention is necessary when used near children.

21. DO NOT use without dust cup and/or filters in place

WAND ATTACHMENTS

22. DO NOT use if airflow is restricted; if air paths, wand, or accessories become blocked, turn the vacuum cleaner off. Remove all obstructions before you turn on the unit again.

23. Keep the end of the wand and accessory openings away from face and body.

24. Keep cleaning tools and wand suction openings away from hair, face, fingers, uncovered feet, or loose clothing.

25. Use only manufacturer’s recommended attachments.

DUST CUP/FILTERS/ACCESSORIES

Before turning on the vacuum:

26. Make sure all filters are thoroughly dry after routine cleaning.

27. Make sure dust cup and all filters are in place after routine maintenance. Refer to MAINTENANCE section for filter cleaning instructions.

28. Make sure accessories are free of blockages.

29. Use only filters and accessories provided by EURO-PRO Operating LLC. [Failure to do so will void the warranty.]

GENERAL CLEANING

30. DO NOT pick up large-sized objects.

31. DO NOT pick up hard or sharp objects such as glass, nails, screws, or coins that could damage the vacuum cleaner.

32. DO NOT pick up smoking or burning objects such as hot coals, cigarette butts, matches or fireplace ash. DO NOT pick up drywall dust.

33. DO NOT pick up flammable or combustible materials such as lighter fluid, gasoline, or kerosene or use vacuum in areas where they may be present.

34. DO NOT pick up toxic solutions such as chlorine bleach, ammonia, or drain cleaner.

35. DO NOT use in an enclosed space where vapors are present from paint, paint thinner, moth-proofing substances, flammable dust, or other explosive or toxic materials.

36. DO NOT vacuum up any liquids.

37. DO NOT immerse vacuum cleaner in water or other liquids.

38. DO NOT use outdoors or on wet surfaces; use only on dry surfaces.

39. Use extra care when cleaning on stairs.

Technical Specification

Voltage: 120V., 60Hz

Watts: 500W

Amps: 4.2 A