Loading ...
Loading ...
Loading ...
Assembly / Owner’s Manual
6
Metal Screw
Tab for Grounding
Screw
Adapter
Grounded
Outlet Box
Grounded
Outlet
Grounding Pin
Grounding Instructions (for a 120V AC system )
This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce
the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check
with a qualied electrician or service person if you are in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the product – if it will not t the outlet, have a proper
outlet installed by a qualied electrician.
If you connect the machine to an outlet with GFI (ground fault interrupt) or AFI (arc fault interrupt), machine operation can cause the circuit to trip.
This machine is for use on a nominal 120-V circuit, and has a grounding plug that looks like the plug illustrated below. A temporary
adapter that looks like the adapter illustrated may be used to connect this plug to a 2-pole receptacle as shown if a properly
grounded outlet is not available.
The temporary adapter should be used only until a properly grounded outlet can be installed by a qualied electrician. The tab for the grounding
screw must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in
place by a metal screw.
Earthing Instructions (for a 220-240V AC system )
This product must be electrically earthed. If a malfunction occurs, correct earthing decreases the risk of electric shock. The power cord is equipped
with an equipment-earthing conductor, and must be connected to an outlet that is properly installed and earthed.
The electrical wiring must comply with all applicable local and provincial standards and requirements.
Incorrect connection of the equipment-earthing conductor can result in a risk of electric shock. Consult a
licensed electrician if you are not sure that the machine is correctly earthed. Do not change the plug on
the machine – if it does not t the outlet, have a correct outlet installed by a licensed electrician.
If you connect the machine to an outlet with RCBO (Residual-Current circuit Breaker with Overload protection), machine operation can cause the
circuit to trip. A Surge Protector Device is recommended to protect the machine.
!
If a Surge Protector Device (SPD) is used with this machine, be sure that it matches the power rating of this equipment (220-240V
AC). Do not connect other appliances or devices to the surge protector in combination with this machine.
Make sure that the product is connected to an outlet having the same conguration as the plug. Use the appropriate adapter
supplied with this product.
Loading ...
Loading ...
Loading ...