Loading ...
Loading ...
Loading ...
24
Adjusting TV Rating level
Viewing of some digital TV programmes can be limited
according to the age limit you set.
If the [Lock System] is set to [Off] in the [Setup] menu,
the [DTV Rating] option is not available.
1 Follow the steps 1-3 from “Selecting a Region” on
page 22.
2 Use v/V to select the [Parental Guidance] and press
OK.
3 Input the password using numerical buttons.
If you have not set your password yet, input “0000”.
4 Use v/V to select the [DTV Rating] and press OK.
5 Use v/V to select the [Parental Guidance].
6 use b/B to set the limitation level and press OK.
Select the [No Control] to release the limitation.
To watch programmes that exceed the rating level
you set, your password is required.
Refer to page 45 for more information about rating
levels.
Setting the antenna power
If you are using indoor antenna with a signal amplifier
rated at DC 5V, 100mA, the recorder can supply power
through ANTENNA IN jack.
1 Follow the steps 1-3 from “Selecting a Region” on
page 22.
2 Use v/V to select the [Antenna Feed 5V] and press
OK.
3 Use v/V to select the [On], and press OK to supply
antenna power.
The [Antenna Feed 5V] option must be set to [Off]
when your indoor antenna is supplied the power from
the mains. If you set the [Antenna Feed 5V] option to
[On] for the indoor antenna which is supplied power
from the mains, it may cause serious defect to this
recorder.
Setting the permanent Timeshift
You can set the Time Shift function automatically without
pressing TIMESHIFT button. The timeshift will start after
Digital TV tuner mode is started.
1 Press HOME.
2 Use b/B to select the [Setup], and press OK.
3 Use b/B to select the [Record] option.
4 Use v/V to select the [Permanent Timeshift] and
press OK.
5 Use v/V to select the [On] to apply permanent
timeshift.
This option is not available while recording.
Setting a recording storage location
You can set the storage location where you want to store
the DTV recordings.
1 Press HOME.
2 Use b/B to select the [Setup], and press OK.
3 Use b/B to select the [Record] option.
4 Use v/V to select the [REC Device] and press OK.
5 Use v/V to select a storage, and press OK.
This option is not available while recording.
Caution
Caution
Loading ...
Loading ...
Loading ...