Loading ...
Loading ...
Loading ...
17
Wireless LAN adapter connection
1 Connect the supplied wireless LAN adapter to the
USB port on the rear panel.
2 Fold the wireless LAN adapter to the upper direction.
Wireless network setting (Infrastructure)
If there is a DHCP server on the local area network (LAN)
via wired connection, this recorder will automatically be
allocated an IP address.
1 Press HOME.
2 Use b/B to select the [Setup], and press OK.
3 Use b/B to select the [Network] option.
4 Use v/V to select the [Wireless Setup], and press
OK.
5 Use v/V to select a [Profile Name], and press OK.
A maximum of 3 profile names can be set for the
wireless network setup.
6 Use v/V to select the [Infrastructure (AP)], and press
OK.
The recorder scans for all of the available access
points or wireless routers within range and displays
them as a list.
7 Use v/V to select a SSID, and press OK.
If you have security on your access point or wireless
router, verify that the WEP or WPA key that was
entered into the recorder matches the router’s
information exactly.
You need to input the security code as necessary.
Select [Alphabet Capital], [Alphabet Small] or
[Symbol], and press OK to change the character set
of the virtual keyboard.
[Space]: Inserts a space at the cursor position.
[Delete]: Delete a previous character at the cursor
position.
[T t]: Moves cursor to the left or right.
[OK]: Complete inputting security code.
[Cancel]: Cancels the naming, and return to the
previous.
8 Check the network information, and press OK to finish
the network setup.
Preparation:
Before setting the wireless network, you need to:
– connect the broadband internet to the wireless
home network.
– connect the wireless LAN adapter on the USB
port.
– set the access point or wireless router.
– note the SSID and security code of the network.
Loading ...
Loading ...
Loading ...