McIntosh MCT500 Player

User Manual - Page 23

For MCT500.

PDF File Manual, 28 pages, Read Online | Download pdf file

MCT500 photo
Loading ...
Loading ...
Loading ...
23
Power Mode
The MCT500 incorporates an Auto Off Feature, which
can automatically place the SACD/CD Transport into
the Power Saving Standby/Off Mode (default setting).
This occurs approximately 30 minutes after there
has been an absence of a Digital Audio Signal. If it is
desirable to disable the Auto Off Feature, perform the
following steps:
1. Using the MCT500 Remote Control, press and
hold in the (Power) Push-button for about 5-10
seconds, at which time the Front Panel Display
indicates “Auto STBY Off. Refer to figure 44.
2. The MCT500 will switch Off and the LED above
the STAND/BY Push-button will illuminate Red
in color. Press the (Power) Push-button to
switch the MCT500 On.
3. To re-active the Auto Off Feature, press and hold
in the Power Push-button on the Remote Con-
trol for about 5-10 seconds, at which time the Front
Panel Display indicates “Auto STBY On”. Refer to
figure 45.
4. The MCT500 will switch Off and the LED above
the STAND/BY Push-button will illuminate Green
in color. Press the (Power) Push-button to
switch the MCT500 On.
Display Modes
The MCT500 Front Panel Display indicates both track
number and playing time. There are three playing time
display indications: track elapse time, track remaining
time or disc remaining time. To change from the de-
fault setting of track elapse time, press the DSP/TIME
Push-button on the Remote Control. Refer to figures
24, 41, 42 and 43.
Display Brightness
There are three available Settings for the Front Panel
Display. The choices include brightness settings of
high (default setting), medium or low. To change the
brightness setting perform the following steps and
refer to figure 24:
1. Press the SHIFT Push-button.
2. Momentarily press the 2 (DIM) Push-button to
change the current brightness setting. Repeat this
until the desired brightness setting is selected.
3. Press the DISC LAYER Push-button to store the
new brightness setting.
How to Operate the MCT500, con’t
Figure 42
1 -2m35s
Figure 43
1 -51m33s
Auto STBY On
Figure 45
Auto STBY Off
Figure 44
Fig ure 41
1 1m35s
Figure 24
Loading ...
Loading ...
Loading ...