Loading ...
Loading ...
Loading ...
22
Selection of a Different Sub Folder
1. Press the Number 4 Push-button. The Front Panel
Display will indicate the name of the current
Folder.
2. Press the Number 2 Push-Button to select an
Upper▲ Data Folder or press the Number 8 Push-
Button to select a Lower▼ Data Folder. Once the
desired folder has been selected, push the Number
6 Push-Button once to to indentify the first track
in the folder. Press the Number 6 to start playing
the first track from the selected folder or press
the Number 6 a second time to start playing the
second track.
3. Press the MENU/TEXT Push-button to display
the Artist Name, followed by the Album Name
and then the Track Name and Number.
4. Press the DISP/TIME Push-button to display the
track number display time. Press the DISP/TIME
Push-button a second time to display the Audio
Format Type and the Sampling Frequency.
tracks contained in the folder. The Folder Mode will
play back the tracks contained in the selected folder.
Refer to figure 39.
1. Press the PLAY/PAUSE/; Push-button to start
Playback. Refer to figure 40.
After all the tracks have been played the MCT500
will stop.
Note: Use the ▲ up and ▼ down directional Push-
buttons to select folders on the disc.
How to Operate the MCT500, con’t
1 mp-3
Figure 39
Figure 40
4 2m15s
Playback of Data Disc or
USB Flash Memory Data Drive
Load a DATA Disc (CD or DVD) or insert a DATA
USB Flash Memory into the MCT500. The Front
Panel Display will then indicate whether a Data Disk
or a DATA USB Flash Memory has been inserted into
the MCT500. For additional information refer to pages
16 and 17.
After the Folder Mode has been selected, the Front
Panel Information Display will indicate the Folders,
Sub Folders and Tracks. It also indicates the Album
Name, the Artist Name, the Track Name, the Track
Time, along with the Audio Format Type and Sam-
pling Frequency. Due to the operational differences
of various computers and the MCT500, sequel listing
of the Folders, Sub Folders and Tracks will usually be
different. If the All Mode on the MCT500 was select-
ed the sequential listing will also be different.
Starting Playback
1. Use the INPUT Push-button to select USB or
DISC.
2. Using the Remote Control, press the Number 5
Push-button to start playback.
3. If the desired track for playback is located in a
different folder, first press the Number 4 Push-
Button. Then use the Number 2 (select the Up-
per▲ Data Folder
) or Number 8 (select the Low-
er▼ Data Folder) Push-Button to select the desired
Folder. Select the desired Track using the Number
2 or Number 8 Push-button. Once the Desired
Track Name is indicated on the Front Panel Infor-
mation Display, press the Number 5 Push-button
to start playback of the track.
Note: Once the desired folder has been selected
the Remote Control NEXT : Push-button
can be used to select the desired track.
Then the Remote Control PLAY Push-
button when pushed will start playback of
the track.
4. While the track just selected is playing back, the
Front Panel Display may also indicate the Track
Name, followed by the Artist Name and/or the
Album Name by pressing the MENU/TEXT
Push-button several times.
5. Press the DISPLAY/TIME Push-button (once or
twice) to indicate on the Front Panel Display the
Audio Format Type and Sampling Frequency of
the track that is playing back.
Loading ...
Loading ...
Loading ...