Loading ...
Loading ...
Loading ...
ModelName: ICD-UX522/UX522F/UX523/UX523F
PartNumber: 4-293-033-13
133
133
Troubleshooting
Table of
Contents
Index
Message Cause/Remedy
Invalid Operation
You cannot divide or set a track mark in files in the folder
in the playback-only area (the
tab and the tab).
When a memory card has a bad block on it, the card
cannot be written to. Prepare a new memory card to
replace the current one.
The file name has reached the maximum number of
characters; you cannot divide the file. Shorten the file name.
The “Divide All Track Marks” function cannot be used
because there is a track mark within 0.5 seconds from the
dividing position.
The “Divide All Track Marks” function cannot be used
because there is a track mark within 0.5 seconds from the
beginning of a file or the end of a file.
The file length is less than 1 second; you cannot divide such
a short file.
The “Divide Current Position” function cannot be used at a
position within 0.5 seconds from the beginning of a file or
the end of a file.
New File
The file being recorded has reached the maximum size
limit (2 GB for an LPCM file, and 1 GB for an MP3 file).
The file will be divided automatically and recording will
continue as a new file.
Invalid when Noise Cut is
ON
When the NOISE CUT switch is set to “ON,” the effect
function does not work. Set the NOISE CUT switch to
“OFF.” (
p. 45).
Change Folder
If there are no files in the
or folder, no folders are
displayed in the display window. A folder containing a file
will be displayed.
Cannot Divide - Exceeds
Max 199 Files in Folder
When there are already 199 files in the selected folder or
the total number of files stored on the IC recorder exceeds
the maximum, you cannot divide a file. Erase some files
before dividing a file.
Same File Name Exists
A file of the same file name already exists in the folder, so a
file cannot be created or renamed.
Erased Track Marks too
near Divide Point
When there is a track mark set within 0.5 seconds from the
dividing position, the track mark is automatically erased.
No operation with
Memory Card
You cannot set an alarm in a file stored on a memory card.
Switch the memory media of the IC recorder to “Built-In
Memory” (
p. 29, 30).
AVLS
*
The volume of the playback sound exceeds the AVLS-
specified level. Adjust the volume to a moderate level.
System Error
A system error other than the above has occurred. Remove
the battery and re-insert it.
*
: for the European models only
Loading ...
Loading ...
Loading ...