Loading ...
Loading ...
Loading ...
25En
English
• Releasing the front panel allows
easier access to the trim ring.
• When reattaching the trim ring,
point the side with the notched
tab down.
2 Insert the supplied extraction
keys into both sides of the unit
until they click into place.
3 Pull the unit out of the dashboard.
To secure the front panel
The front panel can be secured with
the supplied screw.
The microphone should be placed
directly in front of the driver at a
suitable distance to pick up their voice
clearly.
CAUTION
It is extremely dangerous to allow the
microphone lead to become wound
around the steering column or shift
lever. Be sure to install the
microphone in such a way that it will
not obstruct driving. It is
recommended to use the clamps (sold
separately) to arrange the lead.
NOTE
Depending on the vehicle model, the
microphone cable length may be too
short when you mount the
microphone on the sun visor. In such
cases, install the microphone on the
steering column.
To install on the sun visor
1 Fit the microphone lead into the
groove.
2 Install the microphone clip on the
sun visor.
Lowering the sun visor reduces the
v
oice recognition rate.
Installing the
microphone
Screw
Microphone
lead
Groove
To install on the steering
column
1 Slide the microphone base to
detach it from the microphone
clip.
Microphone
Microphone clip
Microphone base
2 Install the microphone on the rear
side of the steering column.
Microphone clip
Double-sided tape
Loading ...
Loading ...
Loading ...