Loading ...
Loading ...
Loading ...
24En
Power amp (sold separately)
Perform these connections when
using the optional amplifier.
System remote control
Connect to blue/white cable.
Power amp (sold separately)
Connect with RCA cables (sold
separately)
To front output
Front speaker
To rear output or subwoofer output
Rear speaker or subwoofer
Important
• Check all connections and systems
before final installation.
• Do not use unauthorized parts as
this may cause malfunctions.
• C
onsult your dealer if installation
requires drilling of holes or other
modifications to the vehicle.
• D
o not install this unit where:
–it may interfere with operation of
th
e vehicle.
– it may cause injury to a passenger
as a r
esult of a sudden stop.
• The semiconductor laser will be
damaged if it overheats. Install this
unit away from hot places such as
near the heater outlet.
• Opti
mum
performance is
obtained when the
unit is installed at an
angle of less than 60°.
• W
hen installing, to ensure proper
heat dispersal when using this unit,
make sure you leave ample space
behind the rear panel and wrap any
loose cables so they are not blocking
the vents.
DIN mount installation
1 Insert the supplied mounting
sleeve into the dashboard.
2 Secure the mounting sleeve by
using a screwdriver to bend the
metal tabs (90°) into place.
Installation
Leave ample
space
5 cm
5 cm
Dashboard
Mounting sleeve
• M
ake sure that the unit is
installed securely in place. An
unstable installation may cause
skipping or other malfunctions.
When not using the supplied
mounting sleeve
1 Line up the holes on the
mounting bracket with the holes
on the sides of the unit to attach
the bracket.
2 Screw in one screw on each side to
hold the unit in place.
Screw
Mounting bracket
Dashboard or console
• Us
e either truss (5 mm × 9 mm) or
flush surface (5 mm × 9 mm)
s
crews, depending on the bracket
screw holes.
Using the included bracket
Check to make sure that the included
bracket matches your particular
model of vehicle and then attach it to
the unit as shown below.
Removing the unit (installed
with the supplied mounting
sleeve)
1 Remove the trim ring.
Trim ring
Notched tab
Screw
Bracket
Loading ...
Loading ...
Loading ...