Loading ...
Loading ...
Loading ...
Press the park assistance button or shift into
reverse gear when the vehicle is stationary to
switch on the parking assistant.
3. Move the Controller to the right.
4. Activate the parking assistant on the Control
Display: "Autom. Parking"
5. On the Control Display, confirm the required
direction for driving out of the parking space if
necessary.
6. Steptronic transmission:
The system takes control of the maneuver. A
message will be displayed at the end of the
maneuver.
7. Make sure that the traffic situation permits
driving out of the parking space and drive off
as usual.
The parking assistant is switched off auto‐
matically.
Depending on the equipment
version: back-up assistant
Concept
The system supports the driver when driving in
reverse, for instance when driving out of tight
parking or street situations.
The vehicle stores the driving movements of the
last route before the vehicle is switched off. This
stored route can be driven back with automated
steering.
General information
This function may not be available. Contact your
authorized dealer’s service center or another
qualified service center as to whether this addi‐
tional function is currently in your vehicle or when
it can be installed in your vehicle in the future.
The system takes control of the steering when
driving in reverse along the stored route.
The driver controls driving the vehicle via accel‐
erator pedal and brake.
Functional requirement
▷ Drive forward without interruption to store the
route.
▷ A maximum of 165 ft/50 m will be stored.
▷ To store the route, do not exceed a driving
speed of 22 mph/36 km/h.
▷ The return route must be at least
12 in./30 cm wider than your vehicle.
Driving back with automated
steering
1. Press the park assistance button or shift into
reverse gear when the vehicle is stationary
and the drive-ready state is switched on.
2. Move the Controller to the right.
3. "Back-up Assistant"
The system takes over the steering.
The possible route is shown on the Control
Display.
4. Take your hands off the steering wheel and
carefully drive off with the accelerator pedal
and the brake.
When driving in reverse, pay attention to the
vehicle's surroundings, and if you suddenly
encounter an obstacle, stop immediately and
take over control of the vehicle. Pay attention
to the information from the PDC.
5. Follow the instructions on the Control Display
where required.
6. Stop no later than when normal traffic is
reached and take control of the vehicle, such
as by shifting to a forward gear.
At the end of the stored route, a signal will
sound and a request will be displayed, also
with the instruction to take control of the ve‐
hicle.
Terminating the system
The system automatically cancels in situations
such as the following:
Seite 246
CONTROLS
Driver assistance systems
246
Online Edition for Part no. 01402720992 - II/19
Loading ...
Loading ...
Loading ...