Loading ...
Loading ...
Loading ...
Function bars
Function bar on the right
Assistance functions, refer to page 237, can be
activated via the right function bar and settings
can be entered. Move the Controller to the right,
if needed.
▷ "Autom. Parking", refer to page 241.
▷ "Back-up Assistant", refer to page 246.
▷ "Camera image"
▷ "Brightness", refer to page 240.
▷ "Contrast", refer to page 240.
▷ "Parking aid lines", refer to page 237.
▷ "Obstacle mark.", refer to page 238.
▷ "Settings": apply settings, for instance to
use the activation points for Panorama View.
Function bar on the left
The left function bar can be used for the direct
selection of various views. Move the Controller to
the left, if needed.
▷ "Car wash", refer to page 238.
▷ "Parking": around the vehicle.
▷ "3D view": available camera, refer to
page 236.
Assistance functions
General information
More than one assistance function can be active
at the same time.
The following assistance functions can be man‐
ually activated:
▷ "Parking aid lines".
▷ "Obstacle mark.".
▷ "Car wash".
The following assistance functions are automati‐
cally displayed:
▷ Side protection, refer to page 238.
▷ Door opening angle, refer to page 238.
Parking aid lines
Pathway lines
Pathway lines help you to estimate the space re‐
quired when parking and maneuvering on level
roads.
Pathway lines depend on the steering angle and
are continuously adjusted to the steering wheel
movements.
Turning radius lines
Turning radius lines can only be superimposed
on the camera image together with pathway
lines.
Turning radius lines show the course of the
smallest possible turning radius on a level road.
Only one turning radius line is displayed after the
steering wheel is turned past a certain angle.
Parking using pathway and turning radius
lines
1.
Position the vehicle so that the red turning ra‐
dius line leads to within the limits of the park‐
ing space.
Seite 237
Driver assistance systems
CONTROLS
237
Online Edition for Part no. 01402720992 - II/19
Loading ...
Loading ...
Loading ...