Loading ...
Loading ...
Loading ...
tems can be individually configured. The individ‐
ual settings are activated and stored for the
driver profile currently used. As soon as a setting
is changed on the menu, all settings of the menu
are activated.
Press the button repeatedly.
The following settings are switched be‐
tween:
"ALL ON": all Intelligent Safety systems are
switched on. Basic settings are activated for the
subfunctions.
"INDIVIDUAL": the Intelligent Safety systems are
switched on according to the individual settings.
Some Intelligent Safety systems cannot be indi‐
vidually switched off.
Press and hold this button.
All Intelligent Safety systems are
switched off.
Button Status
Button lights up green: all Intelligent
Safety systems are switched on.
Button lights up orange: some Intelli‐
gent Safety systems are switched off
or currently unavailable.
Button does not light up: all Intelligent
Safety systems are switched off.
Setting the intensity of the steering
wheel vibration
Via iDrive:
1.
"CAR"
2. "Settings"
3. "Driver Assistance"
4. "Feedback on the steering wheel"
5. "Vibration intensity"
6. Select the desired setting.
The setting is applied to all Intelligent Safety sys‐
tems and stored for the driver profile currently
used.
Warning function
Light in the exterior mirror
Acute warning
If there is a risk of collision, the light in the exte‐
rior mirror flashes and the steering wheel vi‐
brates. A Check Control message is displayed at
the same time.
If necessary, an active steering intervention then
takes place to prevent collisions and maintain the
vehicle within its own lane.
The steering intervention can be noticed on the
steering wheel and can be manually overridden
at any time.
System limits
Safety information
Warning
The system is designed to operate in certain
conditions and circumstances. Due to condi‐
tions or other factors, the system may not re‐
spond. There may be a risk of accident or risk
of damage to property. Actively intervene as
warranted. Refer to the information in this Own‐
er’s Manual regarding the scope of the sys‐
tem’s operation and limitations.
Seite 198
CONTROLS
Safety
198
Online Edition for Part no. 01402720992 - II/19
Loading ...
Loading ...
Loading ...