Loading ...
Loading ...
Loading ...
7
Fahrenheit and Celsius
The temperature is preset at Fahrenheit, but can be changed to
Celsius.
To Change: Press and hold BROIL for 5 seconds. A tone will
sound, and “C” will appear on the display. Repeat to change
back to Fahrenheit. To exit mode, press OFF/CANCEL or wait
3seconds.
Timer
The timer can be set in hours or minutes up to 12 hours and
59 minutes, and counts down the set time either in hours and
minutes, or in minutes and seconds. The timer does not start or
stop the oven.
To Set:
1. Press TIMER SET/OFF. The timer indicator light will light up.
2. Press the TEMP/TIME “up” or “down” arrow pads to set the
length of time.
3. Press START. When the set time ends, end-of-cycle tones will
sound.
4. Press TIMER SET/OFF pad twice anytime to cancel the timer
and reminder tones.
If Off/Cancel is pressed, the oven will turn off and the cook
function will be disabled.
To display the time of day for 5 seconds when the timer is
counting down, press CLOCK.
If Start is not pressed within 5 seconds after pressing Timer Set/
Off or Temp/Time arrow pads, the “PSH” indicator light will ash
and the push to start tone will sound as a reminder. If no action is
taken after 1 minute, the display will return to the time of day or
bake or broil mode.
The timer can be reprogrammed to change the time while it is
running.
To Reprogram:
1. Press TIMER SET/OFF.
2. Press the TEMP/TIME “up” or “down” arrow pads to adjust
time.
3. Press START.
Control Lock
The Control Lock function blocks the control panel pads to avoid
unintended use of cook functions.
When the control is locked, only Clock, Oven Light and Timer
Set/Off will function.
To Lock/Unlock Control: Before locking, make sure the cook
functions are off. Press and hold START for 3 seconds, and “Loc”
will appear on the display. Repeat to unlock. “Loc” will disappear
from the display.
Oven Temperature Control
IMPORTANT: Do not use a thermometer to measure oven
temperature. Elements will cycle on and off as needed to provide
consistent temperature but may run slightly hot or cool at any
point in time due to this cycling. Most thermometers are slow
to react to temperature change and will not provide an accurate
reading due to this cycling.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature
calibration can be adjusted. It can be changed in Fahrenheit or
Celsius.
A minus sign means the oven will be cooler by the displayed
amount. The absence of a minus sign means the oven will be
warmer by the displayed amount. Use the following chart as a
guide.
ADJUSTMENT °F
(ADJUSTMENT °C)
COOKS FOOD
10°F (6°C) ...a little more
20°F (11°C) ...moderately more
30°F (17°C) ...much more
-10°F (-6°C) ...a little less
-20°F (-11°C) ...moderately less
-30°F (-17°C) ...much less
To Adjust Oven Temperature Calibration:
1. Press and hold BAKE for 5 seconds until the oven display
shows the current calibration, for example “00.”
2. Press the TEMP/TIME “up” or “down” arrow pad(s) to
increase or to decrease the temperature in 10°F (6°C)
amounts. The adjustment can be set between 30°F (17°C)
and -30°F (-17°C).
3. Press START to save the adjustment, or press OFF/CANCEL
to exit without change.
Loading ...
Loading ...
Loading ...