Loading ...
Loading ...
Loading ...
6
ELECTRONIC OVEN CONTROL
Use the following chart as a guide for cookware material
characteristics.
COOKWARE CHARACTERISTICS
Aluminum ■ Heats quickly and evenly.
■ Suitable for all types of cooking.
■ Medium or heavy thickness is
best for most cooking tasks.
Cast iron ■ Heats slowly and evenly.
■ Good for browning and frying.
■ Maintains heat for slow cooking.
Ceramic or Ceramic
glass
■ Follow manufacturer’s
instructions.
■ Heats slowly, but unevenly.
■ Ideal results on low to medium
heat settings.
COOKWARE CHARACTERISTICS
Copper ■ Heats very quickly and evenly.
Earthenware ■ Follow manufacturer’s
instructions.
■ Use on low heat settings.
Porcelain
enamel-on-steel or
cast iron
■ See stainless steel or cast iron.
Stainless steel ■ Heats quickly, but unevenly.
■ A core or base of aluminum
or copper on stainless steel
provides even heating.
Display
When power is rst supplied to the appliance, a ashing time will
appear on the display. Press OFF/CANCEL to clear ashing time
from the display.
If ashing time appears, a power failure has occurred. Press
OFF/CANCEL and reset the clock if needed.
When the oven is not in use, the display shows the time of day.
When performing a cook or timer function, the display will show
either hours and minutes, or minutes and seconds.
Oven Indicator Lights
The indicator lights are located on both sides of the display. The
indicator lights light up or ash when the oven is in one of the
following modes: Bake, Broil or Timer.
Start
Start begins any oven function. If Start is not pressed within
5 seconds after pressing a function pad, the Push to Start
(“PSH”) indicator light will ash and the push to start tone will
sound as a reminder.
If Start is not pressed within 1 minute after pressing a function
pad, the oven display will return to the time of day mode and the
programmed function will be canceled.
Off/Cancel
Off/Cancel stops any function except the Clock, Timer and
Control Lock.
Clock
This is a 12 hour clock and does not show a.m. or p.m.
To Set:
Before setting, make sure the oven and Timer are off. Press
OFF/CANCEL to cancel the oven, and press TIMER SET/OFF
twice to cancel the timer.
1. Press CLOCK.
2. Press the TEMP/TIME “up” or “down” arrow pads to set the
time of day.
3. Press CLOCK or START.
Tones
Tones are audible signals, indicating the following:
One tone
■ Valid pad press
■ Oven is preheated (long tone)
■ Function has been entered
Three tones
■ Invalid pad press
■ Push to start reminder
Cycling tones
■ End of cycle
A
B
C
D
F
G
J
KL
E
IH
A. Oven Light
B. Clock
C. Bake indicator light
D. Display
E. Timer indicator light
F. Start (control lock)
G. Cancel
H. Temp/Time
I. Broil
J. Bake
K. Broil indicator light
L. Timer Set/Off
Loading ...
Loading ...
Loading ...