Loading ...
Loading ...
Loading ...
Childproof lock en
19
AChildproof lock
Childproof lock
Your appliance is equipped with a childproof lock so
that children cannot switch it on accidentally or change
any settings.
Notes
■ You can go to the basic settings to specify whether
you want the option to set the childproof lock.
~ "Basic settings" on page 19
■ If a hob is connected, it will not be affected by the
childproof lock on the oven.
Activating and deactivating
To activate the childproof lock, the function selector
must be set to the "Off" position.
Press and hold the
D button for approx. 4 seconds.
The symbol for this function will appear on the display.
The childproof lock is now activated.
Note: If a timer duration
t has been set, this will
continue to count down. While the childproof lock is
active, the timer duration cannot be changed.
To deactivate the childproof lock, press and hold the
D button again for approx. 4 seconds until the symbol
goes out on the display.
QBasic settings
Ba s i c s et t i ngs
There are various settings available to you in order to
help use your appliance effectively and simply. You can
change these settings as required.
List of basic settings
Depending on the features of your appliance, not all
basic settings will be available.
--------
Note: If your appliance is equipped with the Home
Connect function, you will find the Home Connect
settings at the end of the basic settings for your
appliance.
The Home Connect settings begin with •’.
Changing the basic settings
The function selector must be set to the "Off" position.
1. Press and hold the v button for approximately
4 seconds.
The first basic setting will appear on the display,
e.g. ™‹‚ ‚.
2. Turn the temperature selector to change the setting
as required.
3. Use the @ button to navigate to the next basic
setting.
4. Using the A or @ button, continue going through all
the basic settings as described above, changing the
settings if necessary using the temperature selector.
5. When you have finished, press and hold the
v button again for approximately 4 seconds to
confirm the settings.
All basic settings have now been applied.
You can change the basic settings again at any time.
Note: Your changes to the basic settings will be
retained even after a power failure.
Basic setting Options
™‹
‚
Audible signal duration upon
completion of a cooking time
or timer duration
‚ = approx. 10 seconds
ƒ = approx. 30 seconds*
„ = approx. 2 minutes
™‹
ƒ
Amount of time until a setting
is applied
‚ = approx. 3 seconds*
ƒ = approx. 6 seconds
„ = approx. 10 seconds
™‹
„
Button tone that sounds when
a button is touched
‹ = off
‚ = on*
™‹
…
Brightness of the display illu-
mination
‚ = dark
ƒ = medium*
„ = bright
™‹
†
Display time of day
‹ = hide the time
‚ = display the time*
™‹
‡
Enable childproof lock activa-
tion?
‹ = no
‚ = yes*
ƒ = yes, with locked door**
™‹
ˆ
Interior lighting on when
appliance in operation?
‹ = no
‚ = yes*
™‹
‰
Cooling fan run-on time
‚ = short
ƒ = medium*
„ = long
… = extra long
™‹
Š
Telescopic rails retrofitted?**
‹ = no* (for rails and single
pull-out system)
‚ = yes (for double and triple
pull-out systems)
™‚
‹
Sabbath mode available?
‹ = no*
‚ = yes
™‚
‚
Water hardness**
‹ = softened
‚ = soft (up to 1.3 mmol/l)
ƒ = medium (1.3 - 2.5 mmol/
l)
„ = hard (2.5 - 3.8 mmol/l)
… = very hard* (above
3.8 mmol/l)
™‚
ƒ
Reset all values to factory set-
tings?
‹ = no*
‚ = yes
* Factory setting (factory settings may vary depending on the appli-
ance model)
** Not available for all appliance types.
Loading ...
Loading ...
Loading ...