Loading ...
Loading ...
Loading ...
63
Terminal Block, Patch Panel (BMP®21-PLUS and 2.0 Only)
Selecting a Label Type
BMP
®
21-PLUS/BMP
®
21-LAB User’s Manual
Terminal Block, Patch Panel (BMP
®
21-PLUS and 2.0 Only)
Terminal Block and Patch Panel label types are designed to be used with any media, except
SelfLam or Permasleeve. If SelfLam or Permasleeve is installed, these label types are not
available.
To use Terminal Block or Patch Panel:
1. Press LABEL TYPE .
2. Navigate to the desired label type and press Enter .
Data fields display requesting additional information. (For a review of data field navigation,
see page 24.) The data fields for Terminal Block and Patch Panel are similar.
1. In the Spacing: field, enter the amount of space that exists between the terminals or ports.
Note: If you have indicated the correct spacing between the requested number of
terminals or ports, the printed label can be attached to the terminal block or patch
panel as one strip. There is no need to cut and adhere each individual block or port
identifier.
2. Navigate to the Serial: field, then use the left or right navigation key to turn serialization
ON or OFF.
If serialization is turned ON, proceed to Step 4.
Note: If serialization is turned ON, you do not have to specify the number of
terminations (or the number of ports if using Patch Panel).
Terminal Block data fields Patch Panel data fields
Loading ...
Loading ...
Loading ...