Loading ...
Loading ...
Loading ...
45
Formatting
Datamatrix and QR Codes (Version 2.0 only)
BMP
®
21-PLUS/BMP
®
21-LAB User’s Manual
If you want to enter more data on the same line of text as the barcode:
1. Press the right navigation key to move off the barcode.
2. Enter the data. (Be sure to press Space before entering more data if you want to separate
the data from the barcode.)
Edit Barcode Data
To edit barcode data:
1. Using the left or right navigation keys, position the cursor in the barcode text.
2. If you are deleting barcode data, be sure to position the cursor to the right of the character
you want to delete, then press Backspace .
3. If you are inserting additional data, position the cursor in the barcode data where new data
will be entered, then enter the data.
4. To exit the barcode data, use the left or right navigation keys to move off the barcode data.
Datamatrix and QR Codes (Version 2.0 only)
Barcode creation is only available for select ASCII characters, as shown in Appendix B
on page 85.
Note: This feature available only on Version 2.0.
The BMP
®
21-PLUS/BMP
®
21-Lab Label Printer supports Datamatrix and QR Codes in two
different sizes, with 0.59 inches (15 mm) being the minimum supported diameter that a Brady
scanner can read. Datamatrix Codes will accept a maximum of 44 characters and QR Codes
can accept up to 50 characters. This feature is only supported on .75-inch (19.1 mm) media.
Multiple lines of text/codes is not supported.
Barcode in line of data Printed label of barcode in line of data
Loading ...
Loading ...
Loading ...