Loading ...
Loading ...
Loading ...
Power Source
Physical and Environmental Characteristics
6
BMP
®
21-PLUS/BMP
®
21-LAB User’s Manual
Power Source
Power is supplied to the BMP
®
21-PLUS/BMP
®
21-LAB Label Printer by six AA alkaline
batteries, a BMP21-PLUS-BATT Lithium Ion battery pack, or by an AC power adapter.
To maintain maximum printer performance, use basic AA alkaline batteries, NOT
rechargeable (Ultimate Lithium) AA batteries.
The optional Li-Ion battery pack is rechargeable, but must be removed from the printer and
attached to the AC power adapter for charging to take place.
The AC power adapter is used to recharge the Li-ion battery pack outside the printer, but it can
also be used to power the BMP®21-PLUS printer without batteries.
WARNING
Do not expose batteries to temperatures above 60C (140F).
Do not disassemble or mistreat the battery pack.
Do not attempt to open, damage, or replace components in the battery pack.
The Battery Pack should only be used in the BMP
®
21-PLUS/BMP
®
21-LAB Label
Printer.
Do not use any other rechargeable battery pack other than the BMP21-PLUS-BATT
supplied for the BMP
®
21-PLUS/BMP
®
21-LAB Label Printer.
Do not allow metal or other conductive materials to touch the battery terminals.
WARNING
Keep the battery pack away from sparks, flames, or other heat sources.
Keep the battery pack away from water.
Never lay objects on top of the battery pack.
Store your battery pack only in a cool, dry place.
Keep the battery pack out of the reach of children.
Special precautions should be taken when handling the battery pack during disposal to
prevent impact to the cells.
The battery pack must be recycled or disposed of properly according to federal, state,
and municipal regulations.
Loading ...
Loading ...
Loading ...