Loading ...
Loading ...
Loading ...
Cleaning maintenance and storage
Your Greenworks tools tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
After use and before storage
• After use, carefully clean the blades. After cleaning, apply
a film of light machine oil to prevent the blades from
rusting.
• Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
• Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
• Make sure all switches are free of debris before and after
use.
Storage
When the tool will not be used for several months, ideally
leave the battery connected to the charger.
Otherwise proceed as follows:
• Fully charge the battery.
• Remove the battery from the tool.
• Store the tool and battery in a secure and dry location.
The storage temperature must always remain in the range
of +10°C to +40°C. Place the battery on a level surface.
• Before using the tool after prolonged storage, fully charge
the battery again.
Troubleshooting
If the tool does not operate correctly, check the following.:
ENGLISH
(Original instructions)
10
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Greenworks
tools product needs replacement, or if it is of
no further use to you, do not dispose of it with
household waste. Make this product available
for separate collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again. Re-use of recycled materials
helps prevent environmental pollution and
reduces the demand for raw materials.
At the end of their useful life, discard batteries
with due care for our environment:
Batteries
• Do not short-circuit the battery terminals.
• Do not dispose of the battery(s) in a fire as this may
result in a risk of personal injury or an explosion.
• Run the battery down completely, then remove it from
the tool.
• Batteries are recyclable. Place the battery(s) in a
suitable packaging to ensure that the terminals cannot
be shortcircuited. Take them to any authorised repair
agent or a local recycling station.
Loading ...
Loading ...
Loading ...