Loading ...
Loading ...
Loading ...
3. Adjust the paper-length guide by squeezing the
adjustment latch and sliding the guides to the size
of the paper being used.
2
11
B5
A4
4. Load paper into the tray. For information about
how to orient the paper, see Tray 2 paper
orientation on page 20
NOTE: Do not adjust the paper guides tightly
against the paper stack. Adjust them to the
indentations or markings in the tray.
NOTE: To prevent jams, adjust the paper guides
to the correct size and do not overll the tray. Be
sure that the top of the stack is below the tray full
indicators, as shown in the enlargement in the
illustration.
NOTE: If the tray is not adjusted correctly, an
error message might display during printing or the
paper might jam.
2
5. Slide the tray completely into the printer.
ETT
-
P
ACKARD
1
2
6. At the computer, begin the printing process from
the software application. Make sure that the driver
is set to the correct paper type and size for the
paper being printed from the tray.
ENWW Load Tray 2 19
Loading ...
Loading ...
Loading ...